This swap kit includes all the brackets necessary to install a Ford 9″ axle into your Jeep TJ/LJ using factory suspension geometry. The upper control arm mounts, sway bar mounts, and panhard/track-bar mount* are integrated into the truss. Nearly every part in this kit tabs interlocks/keys off of the truss once placed (the shock mounts require measuring; we recommend an angle finder to place these properly.)
An assembly guide can be found by clicking here.
*Both factory and raised trackbar positions are pre-cut into this kit.
Welding should be done by a competent welder/shop. Some grinding may be required for an ideal fitment.
**Axle swaps may require use of wheel adapters or new wheels depending on the desired lug pattern for your vehicle**
***Truss/brackets only – you will need to source an axle housing of your own***
This kit may require grinding/welding/fabrication! This is not a “bolt in” product.
*PRODUCT SHIPS BARE METAL*